I love longboarding. It’s a great way to get outside and enjoy the fresh air, but I was surprised at how many things there are to know before you start longboarding.
Those are not something that needs mentoring, but knowing those steps is very useful! So, I’ve compiled a list of five things I wish someone told me before I started longboarding.
Its always about the fun ride but, not always! Knowing those tips wil keep you safe and ahead of the other beginners!
What's in it?
- Here are those 5 Things I Wish Someone Told Me Before I Started Longboarding
- Be careful when you start out – don’t go too fast or take any sharp turns-
- Wear a helmet and pads to protect yourself if you fall-
- Always wear gloves, even on the hottest days
- Get a good board that fits your body type and skill level so you can have the best experience possible with longboarding-
- Longboarding is not just for kids! I’m 30 years old and I love it!-
- Keep Your longboard clean and tight!
- You Can Make your own Longboard as DIY Project!
- My experience:
- What Do I recommend to newbies?:
- Here’s What to Know Before Investing in a Longboard?
- What should I know before investing in a longboard?
- Get the feel of your board on a parking lot before hitting the concrete waves:
- Make sure the streets you longboard on are smooth and free of rocks:
- Always carry a skate tool in order to tighten or loosen your trucks!
- Sand is your enemy while Longboarding!
Here are those 5 Things I Wish Someone Told Me Before I Started Longboarding
Be careful when you start out – don’t go too fast or take any sharp turns-
Starting something is always tricky and kind of scary, but longboarding is not a race. You want to take your time and get the hang of it before you start going faster or make any sharp turns for which you will need better balance anyways.
This is the most common mistake newbies do: they want to be like everyone else and go as fast as possible. But this will only make them more likely to fall off the board because of lack of balance or experience. This is also why you shouldn’t start by going on a steep hill – it might seem exciting but trust me, its not worth all that pain. As long as you are confident in your skills, then feel free to try some hills after getting better at riding down steeper ones first!
If someone tells you that falling over doesn’t hurt, don’t believe them- You can avoid bruises with knee pads and wrist guards which we’re selling so get yourself one today 🙂 For those who want advice for learning how to longboard, always remember to
– wear your helmet and pads! Longboarding is a fun sport but its not worth risking injury. You can’t do it without these so don’t forget them. – find somewhere flat that has smooth pavement for you to practise on before moving onto hills or anything more challenging than the beginner spots. It will take practice until they feel comfortable enough with their skills that they are confident riding down steeper slopes too!
– get off of your board when going downhill if there’s any bumps in the road as this could send you flying off into traffic which isn’t good at all! Once someone becomes confident riding down steeper slopes then they really should try out some jumps and tricks!
Wear a helmet and pads to protect yourself if you fall-
This thing is pretty common along all board riders to fall off! But the real thing is how many time you can stand up and show up without hurt! And it’s more important to wear a helmet for protection of your head.
– Wear the right gear! Longboarding is an extreme sport that involves high speeds and sharp turns, so being properly attired is paramount. The most important part of longboard gear are helmets with full coverage as they can shield one from any serious injuries in case of accidents –
Like getting bumped by a car or crashing into something hard such as concrete pavement, hills or trees. Other protective equipment includes wrist guards (for slippage), elbow pads (to prevent scrape ups) and knee pads (just incase). Without wearing these things you may get injured if you’re not careful when going down steep roads or riding on rails which could send them flying off their board because of the momentum.
Always wear gloves, even on the hottest days
It doesn’t matter how hot it is out, you always need to wear gloves when longboarding. Not only does this protect your hands from the rough surfaces and tight grips on the board, but also prevents any blisters or calluses that can build up over time. You might think that even if you’re careful, you’ll never be able to get a blister while longboarding…but after just one day of riding without wearing them (or not changing your grip), I guarantee they will form!
Besides, have you seen the longboard slide? If you ever wish that to do, you must wear a gloves!
There are two types of gloves that you can wear: fingerless or full. Fingerless usually have a bit more grip and aren’t as hot, but they don’t offer protection for your palms if there’s some kind of accident where the board might slip out of your hands. Full-finger longboard gloves protect both hand surfaces and also give you lots more control over the handlebars to keep from slipping off in turns–but beware that they’re not great on really warm days! I’ve found it best to use fingerless once at night when it cools down, then switch back to my full-fingered ones during the day.
The other thing everyone should know about is how to properly dress before going out!
Get a good board that fits your body type and skill level so you can have the best experience possible with longboarding-
You’ll be able to ride more comfortably with a good board that you feel like fits your body type and skill level.
if you’re still not sure which longboard is right for you, we provide helpful advice in our blog posts about what to look for when buying a longboard.
Some longboards can come with different sizes. The larger the wheels, the faster you’ll go but it will be more difficult to balance and control your board when riding downhill. Smaller wheels are easier to turn but won’t roll as fast on hills or over bumpy terrain. If this is all too confusing for you, talk to us so we can help pick out a longboard that suits your needs!
Some of the most popular types are:
- Drop Down Longboards for riders who want a stable longboard. It’s great for beginners and experienced riders alike because the deck is low to the ground, making it easier to balance on this board
- – Freeride boards are perfect if you’re looking for speed! They have lots of grip between your feet and around the wheel wells which make them ideal when riding over rough terrain or hills; however this type may be too loose for those just starting out with longboarding
- – Cruiser Boards are excellent choices if you don’t plan on going down any steep slopes. These decks usually have soft wheels so they won’t damage asphalt as much, but also move slower than other types of boards. The downside? You might not get the same feeling of speed that you would from a freeride board
- – Downhill Boards are perfect for going fast! The long wheelbase allows you to maintain stability when leaning on your trucks, but it also makes them more difficult to balance
- – Slalom boards have short wheelbases and tight turning radiuses. These downhill skateboards help riders get around quick with sharper turns while maintaining their speed; however they’re harder than other types of longboards so not as beginner friendly
Longboarding is not just for kids! I’m 30 years old and I love it!-
Popular myth is that, skateboard longboard is just for kids! I’m 30 years old and I love it! What I’ve seen from my experience-
– Longboarding is not just for kids, you can longboard at any age.
– You don’t need to be athletic or in shape to get started with this sport as well.
– You’ll find that the hills are less steep when you’re an adult because of your body weight versus a child’s weight.
– Adult riders will also have an easier time steering their board while they’re rolling down hill since there isn’t anything getting in the way!
– Even heavy riders over 300lbs can longboard.
– Longboarding is also great for people with disabilities who can’t skate as well or are more limited to weight-bearing activities!
Keep Your longboard clean and tight!
Always try to keep your longboard clean and tight! It’s a good idea to bring it into the shop or yourself once every two months for them to tighten any loose screws.
If you have your longboard tight, then everything is going to be easier when riding on hills or downhills and this will allow your deck not get scratched up as quickly.
Make the right choice in bearings. This is really important when longboarding because it will determine how fast you go and also how quickly your bearings wear out if they are not up to par with what others have!
The ball bearing are there for grip and speed, so make sure that you find a way of getting them as soon as possible.
Have a plan for what you want to do with the longboard before buying it and make sure that this will be easy enough for your Money skillset so you can learn how to do more tricks as time goes on. If not, then just get a regular skateboard because they are cheaper in price but also much easier on board!
The best way that I know of to get a good longboard is to look for one that has everything you need and want, so it will likely be more expensive but then if you are not happy with the board there won’t be any way of returning it
All in all, I believe that this was just some helpful advice on how to deal with longboarding as a beginner. And now knowing these things myself I am much happier than before! Longboarding can take your mind off of anything bad happening and make life feel better because what doesn’t kill us makes us stronger right?
I hope that this article helped people who were interested in going out and buying their first longboards or even improving at them by learning new tricks!
You Can Make your own Longboard as DIY Project!
If you’re not ready to buy a board just yet, or if you want something that is tailored specifically for your style of riding, then this DIY longboard project is perfect. All the materials required are things most people will have at home already! You’ll need: wood (for the deck), wheels (or skateboard bearings) and screws/nails.
Lets break them down step by step!
Step1- Pick the right wood
Wood for a longboard deck can be made of either softer, flexible woods like pine or fir, or more dense and durable hardwoods such as maple. Try to find some that is flat so you don’t have any bumps in your ride! I would recommend using softwood because it’s cheaper and easier to work with than hardwood.
Step Two- Cut the wood into strips
The width of these pieces will vary depending on how wide you want your board to be but they should all be cut about the same length. If you’re making an eight inch (20cm) wide board then each piece should measure at least 22 inches (56 cm). The height doesn’t matter too much though .
Step3- Cut the ends of your board off
Take one of those strips and put it flat on a table. Position yourself perpendicular to the strip, then measure about two inches (five cm) from one end and cut straight across with some sort of saw that will give you a nice even cut.
Repeat this step for all five pieces in order to obtain what we call “the deck”. All four sides should be clean if done correctly! Once you have these strips-choose which side is going to be face up when placed onto the ground-and sand them down so they’re smooth enough for grip tape to stick easily.
Step4- Put grip tape on your board
Using the roll of adhesive-backed grip tape, measure out about four feet (one meter) and cut it with a pair of scissors. Place this piece onto the backside of one part of “the deck” so that there is enough to overlap at least two inches (five cm). Carefully peel away the paper backing from just one end then place that against another portion of “the deck”.
Peel off the rest, making sure both ends line up as you do so. Covering all five pieces in order before finally peeling off what’s left over from each strip! Allow 24 hours for those grips to dry completely before attempting any longboarding journeys. Wet boards are slippery and dangerous!!
Step5- Put your hardware together
Step- by-step instructions on putting together your longboard hardware. Hardware includes: wheels, bearings, trucks and the board itself!
Wheel installation is pretty straight forward. Pick a spot for them on either side of “the deck” (typically about three inches from each end). Get some grip tape out as well so that you can wrap it around the wheel to keep it in place if need be. The other thing you’ll want to do with these is make sure they’re screwed into place tightly enough such that they don’t come off when riding over bumps or cracks in sidewalks. Use an Allen wrench screwdriver tool for this step but be careful not to strip any screws! Spinning too fast will also loosen up the screws.
– Skateboard trucks are the metal pieces that connect each wheel to the deck, and they’re typically long rectangular shaped bars with a hole in either end so you can hold them together as well as tighten them down onto your board’s top surface for optimal grip. When installing these, it is crucial not to over or under tighten them because this will make skating difficult and potentially dangerous! This step also requires precision because too tight of a grip on one side may cause your wheels to get caught up against the other truck arm while turning, causing friction which could ultimately wear out one side faster than another (leading to uneven riding).
– Bearings are what help keep everything rolling smoothly by connecting both sides of two separate skateboards together. They’re also the reason why it’s important to know what size and type of bearings you have. It is crucial not to use a bearing that does not match with your skateboard, as this could cause potential damage to your board and/or injury if used incorrectly.
– To maintain optimal grip on the top surface of your longboard while skating, always make sure that both trucks are tightened down onto either side of said surface for optimum performance. The tightening process requires precision because too tight or loose will result in difficulties when riding — overtightening can lead to wheels getting caught up against one another during turns (leading to friction wear), whereas undertightening may allow them slip out from beneath you at high speeds!
– When it comes to longboarding, the wheel size is a vital contributing factor for performance. Larger wheels will have more surface area on the top of the board than small ones do — this means they’ll be able to roll on surfaces with less grip (e.g., asphalt) and yet maintain their speed stability when carving out turns at high speeds!
– To make safe, smooth transitions from one foot placement to another while skating, you can utilize “pop.” This tricks consists in crouching down low as your turn up onto whichever side of your skateboard that you’re transitioning towards so that all four wheels are firmly planted and then pushing off quickly into said position. Doing so creates an instant changeover without getting caught up!
I’m 30, living in LA and love my longboard. Longboards have been a vital part of my life ever since the day I got on one at age 14 when Shaun White was sponsored by The National Skate Company.” When you’re an adult it’s less steep because your body does not weigh as much, so it’s easier to steer downhill and control your board while rolling down hills versus if you were a kid. You’ll find that the hill will be less steep than if you were walking up them too which makes riding even better! And then there’s the sense of freedom you get from riding a longboard, which is hard to describe.
– Each board has different flex and handling, so it’s best to demo the boards before buying one
– Your grip tape should be replaced every couple weeks or when your deck starts feeling slick without any traction left on it (shouldn’t take too long)
– There are other ways to break in your trucks than just skating straight down hills – try some carving! And if there isn’t enough snow for downhill boarding then go find a hill that can handle both uphill AND downhill rails.”
“Longboarding might not seem like an activity that everyone would enjoy but I’ve found myself saying “yes!” more often than ever since I started doing it. The longboard is a lot of fun to use as transportation and it’s really easy to learn how to skateboard in just two days with the right help.”
– Longboards are great for commuting because they’re more stable than rollerblades or skates
– They can be used both on flat ground and hills depending on where you live
– You’ll need some protective gear, but most people would prefer knee pads if anything”
“The first thing I did when I got my board was practice standing up straight without needing someone else there so that I could always keep myself upright. Now it feels natural being able to ride at all angles.” -Stand in front of a wall and slowly lean forward until your nose touches the wall. Once your nose has touched the wall, walk back to a standing position slowly and repeat.
-I recommend going as slow as possible at first so that you can learn how longboards work.” -“The most important thing I would tell someone who is just starting out is to go really slow if they are not used to riding on one yet,” says Gossett
-Start by sitting down with both feet securely on the ground in front of you and then stand up once or twice before trying it again without sitting
-It’s probably best for newbies to start off flat but don’t be surprised when hills get tough.” -If this sounds like too much, consider using sidewalks instead of streets!
What Do I recommend to newbies?:
– Start with a flat surface and stand up before trying to go down the hill.
– If this sounds like too much, consider using sidewalks instead of streets!
“The most important thing I would tell someone who is just starting out is to go really slow if they are not used to riding on one yet,” says Gossett.” -If you feel unstable or unsteady, focus on getting your balance back first by standing still and then sitting again for 30 seconds before attempting it once more without support from anything other than your feet. “It’s probably best for newbies to start off flat but don’t be surprised when hills get tough.” – Find some nice easy slopes that can help practice balancing skills (or find a really long hill to push your skills)
– When you’re learning, try using the brakes less. This gives you more stability while trying to balance and learn how to maneuver
– “The most important thing I would tell someone who is just starting out is to go really slow if they are not used to riding on one yet,” says Gossett.”
–If you feel unstable or unsteady, focus on getting your balance back first by standing still and then sitting again for 30 seconds before attempting it once more without support from anything other than your feet.
“It’s probably best for newbies to start off flat but don’t be surprised when hills get tough.” – Find some nice easy slopes that can help you get the hang of things before tackling tougher hills.
– “The first time I started longboarding on a hill, it was scary and intimidating.” says Gossett.
–“I would recommend anyone with those feelings to start off riding down slopes that are not too steep or take them one at a time,” he recommends.
-“You can’t really learn anything from going up so go down for awhile and when you feel like you’re ready, then try uphill ridings!” It might also be helpful to consider renting from an expert if your city has any sort of skate shop because they will know what board is best suited for your needs and skill level.
– The most important thing about longboarders is their attitude and that must be positive!
Here’s What to Know Before Investing in a Longboard?
Are you ready for the next big trend in skateboarding? If so, investing in a longboard might be your answer. But before investing, it is important to know what you are getting into. In this blog post, we will go over some basics of longboarding and what to know before investing.
What should I know before investing in a longboard?
Well, if you are investing into the sport of longboarding for the first time and want to do more than just cruising around on flat surfaces then I would suggest getting a no flex board. These boards will be rigid enough that they don’t bend when turning but are still flexible enough to give you great control over your ride.
The second thing is that there are lots of different types of wheels: grip tape, slick tape or waxed bearings with urethane wheels (or even without). It’s up to what works best for you! Whatever type of wheel it is though always remember to wear gloves so as not get blisters from rubbing against the hard rubber surface!
– investing in a longboard: What should I know before investing in a longboard?
– What to Know Before Investing in a Longboard: The Basics of Longboarding.
– Keywords to include: investing in a longboard, What Should I Know Before Investing In A LongBoard, what are the basics of lonbarding.
This post will detail some basic things that you need to keep in mind when investing into your first ever board! There is so much more do outside of just cruising around on flat surfaces and if want something more than just one type there’s no problem at all! There are lots of different types of boards for various occasions and we’ll get going with their specifications.
While starting, you’ll want to keep in mind that investing into a longboard is not just investing, it’s an investment. That means you need to take good care of your board and do the responsible thing by taking them with you if they’re fragile or heavy!
The first step for investing into a longboard would be knowing what type of riding style are going for: cruising around on flat surfaces (cruisers), tricks and stunts off curbs/stairs (freestyle) or getting some speed down hills (dirt jumping). This will determine what kind of deck shape, flex pattern, trucks size ratio and wheels size range will work best!
Get the feel of your board on a parking lot before hitting the concrete waves:
Get the feel of your board on a parking lot before hitting the concrete waves.
When you’re at speeds over 20mph, it’s easy to catch an edge with one foot or hand and slam into the ground head first. You won’t have any warning because by that point no sound will travel to your ears due to wind resistance.
That’s why high speed crashes are so dangerous – there is little time for reaction when they happen. So make sure you get used to how weight distribution feels as well as what pavement type feels better on different surfaces (concrete vs asphalt) before going fast in public areas like bike paths or sidewalks where people might be walking around just waiting for their chance encounter with a speeding longboarded.
It might take some time before you feel like the wheels are turning fast enough to go faster. When that happens, resist the temptation and try not to use momentum for your next push. This is always a dangerous point in skating because it’s what many newbies make mistakes on when trying to get too much speed with too little control.
The best way of getting more propulsion out of each push is by using a straightening arm motion (push up instead of sideways) as well as making sure all four points of contact between board and ground are touching pavement at once – this means both feet should be planted firmly on the ground while pushing off or one foot should be down and only pushing off from one foot if doing tricks such as sliding rails and rails.
Make sure the streets you longboard on are smooth and free of rocks:
Make sure the streets you longboard on are smooth and free of rocks (from gravel drive ways). Otherwise, you’ll risk doing serious damage to the wheels and bearings.
On a clean road , you should be able to skate at your top speed, but when there is debris, you should slow down.
If the roads are bumpy and full of cracks, it’s better to take a detour on sidewalks or bike paths with smooth surfaces that will allow for speed.
As you gain more experience and it becomes as your reflex, you will be able to determine what the best route in any given situation is.
Always carry a skate tool in order to tighten or loosen your trucks!
Always carry a skate took in order to tighten or loosen your trucks. It’s a good idea to carry this tool so that you can make adjustments as necessary.
Wheels that carry the whole things, can easily be loosen and it can lead to longboard wobble! to prevent that, you can either upgrade your bearings or tighten the trucks.
Sand is your enemy while Longboarding!
Wheels don’t work on sand thats common sense! Even sometimes if you have a good set up, it won’t be enough to go on sand!
Just like in the skateboard world, where there are race tracks for longboards too. If your board has metal trucks (trucks with two axles) and they’re tight(tightening is very important), then it can help by keeping your wheels from lifting off of the ground when going over bumps or curbs.
But if you don’t have this type of truck, then investing more money into perfecting that setup might not work since once again we know that its impossible to ride on sand even with all-terrain tires!
Sand is like ice to a skateboard, you just can’t go over it.
This is the end of this blog post on investing in a longboard! Hope that you liked it and found something useful for yourself. If not please feel free to contact me at any time so we can talk about what else I should write about or if there’s anything specific that you want more information on.